20
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
2) Loosen the four Philips head screws (two on top and two on bottom) that are fastening
the Printer Bracket to the Dispenser’s Main Door.
3) Lift the Printer Assembly up and off the Dispenser Door. The Printer Assembly and
bracket can be discarded; they will not be re-installed.
4) Remove the four screws loosened in step 2 and discard them.
If you have the R01 or
R02 “Clamshell” Printer Assembly:
1)
Unplug the Printer’s Power Cable and Data Cable located on the backside of the Printer
Assembly.
Bracket Screws. Two on
bottom side (not shown)
Power Cable
Data Cable
