31
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
4.2
Pre-Installation Procedure
There are one or two pre-installation procedures to be performed, depending on which side you are
installing:
•
If you are installing Side A, perform procedures 4.2.1 and 4.2.2.
•
If you are installing Side B, perform procedure 4.2.1, and ensure you have installed Side A before
continuing.
4.2.1 Replace the RFK Panel Gasket
The Wayne Ovation dispenser series utilizes a modularized replaceable panel system in the dispenser
door to permit maintenance and upgrading of various electronic modules and displays. When these
panels are replaced the gaskets found between the panels and the dispenser door will need replacing to
ensure the weather proof integrity of the dispenser is maintained.
For this retro-fit there are three gaskets that must be replaced. All gaskets are applied to the front
(outside) surface of the associated bezel opening, as indicated:
MP0526
MP0527
MP0620&
MP0621
