81
How do I pre-plan a route by search?
1.
From the Route planner panel, set your From point and To point.
You can find a location by:
: Keyword
: Address
: Postcode
Input your content and click
to start a search. You may need to select from a category list to narrow
your search results.
2.
Complete the following:
If you want to …
Then …
add a waypoint,
click Add Waypoint.
reset or remove a waypoint,
click
next to the waypoint.
set the route preferences,
click Route option and select:
Mode: Select the Driving, Walking, or Large vehicle
mode to plan your route.
Type of route: Select the Fastest, Shortest, Easiest, or
Economical way to plan your route.
Avoidance: Avoid Unsurfaced roads, Toll roads, Ferry
routes, or Special zone in your route.
The Route option settings will only apply to the route
you are editing.
arrange the destinations in the most
efficient order while two or more
waypoints are included in the
planned trip,
click Waypoint Optimization.
3.
Click Plan Route to calculate your route. The route will be displayed on the map.
4.
Click Save this route. The route is saved to the Pre-planned Routes section and your Navman
simultaneously.
How do I pre-plan a route using the map?
1.
From the map displayed in the Display area, click
.
2.
The cursor will be marked with “Add route”. Move the cursor and then click on the map to set the From
point.
3.
The cursor will be marked with “Click to set destination”. You can:
Move the cursor and then click on the map to set the waypoint.
Move the cursor and then double-click on the map to set the To point.
4.
When done, click Save this route. The route is saved to the Pre-planned Routes section and your Navman
simultaneously.
