87
How do I search for a POI using Connect?
Before you begin, ensure your Navman is correctly plugged into your computer: plug the large end of the USB
cable directly into a USB port on your computer (not a USB hub); plug the small end into
on the bottom
of your Navman.
You can either search for a new location, or search using the last known location on your Navman by
completing the following:
1.
In the Select Location field, you can :
Select a custom location to search. Follow the prompts to select your Country
Æ
Region/State
Æ
Place name, and then select your preference.
Use the last known location on your Navman to search if your Navman stores the navigation data.
2.
Click Continue. The
Available Services
page will display.
3.
Select
your preferred search service. The selected services page will display.
Depending on the country you are navigating, the available search services may vary.
4.
Enter
your search criteria, then click Search. A list of search results will display. For some countries you are
required to accept the terms of use.
5.
Click
next to the POI you want to install to your Navman. The POI will be added to My Places.
