Naviter Oudie 2, Руководство пользователя

Страница: 96 / 185

Oudie 2 91
© 2003 - 2015 ... Naviter d.o.o.
Depending on the Unit settings you can enter the ballast either as the amount of water carried on board
or as Wing loading.
Altitude reserve
All final glide calculations are subject to correction of the altitude reserve. If this value is greater than 0,
then your arrival altitude to the waypoint will be this much above the altitude of the waypoint elevation
from the waypoint database (this may not be its actual altitude, so use at own risk, needless to say).
Volume
This property is only used when connected to a variometer which is capable of receiving commands for
changing the Vario volume. Such instruments are LX 1600 and Cambridge 302.
Vario mute
This functionality is only available on Oudie IGC. If you untick this box the Oudie will give you an
uncompensated vario sound. Great for when all other instruments have failed.
ETE
Pressing the button you may choose from four different ways to calculate estimated time of arrival to the
airport. Calculation is always divided into straight flight and climb time calculations.
1. MC uses the Polar data and MacCready setting to calculate speed to fly and climb rate.
2. Vario uses the last four thermals average to compute climb rate and uses this value to calculate speed
to fly.
3. Avg Speed & Vario uses the average groundspeed over the last 5 minutes for distance and Vario
statistics for climb rate.
4. Avg Speed & MC uses the average groundspeed over the last 5 minutes for distance and MacCready
setting for climb rate.
You may disable "
use altitude difference " if you know you will not climb anymore.
Soaring time
Lets you enter your soaring begin time manually. This is useful for motorgliders, since none of the
instruments send ENL data over NMEA.
Buttons at the bottom will help you enter the correct values by simply using your fingers.