User’s manual NAVIGON 70 Easy | 70 Plus Live
- 14 -
Before you begin
Note:
Use only the charger cable supplied with your navigation device
or an equivalent model from NAVIGON! If you use a different charger
cable, the
NAVIGON Live
services might not be available.
►
Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.
The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.
Caution!
Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Note:
Insert the USB connector securely in the corresponding USB
sockets!
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
Note:
It takes approx. 3 hours to charge the device when the battery is
flat.
A fully charged battery enables up to 3 hours of use depending on the
device configuration.
TMC antenna
The navigation device has an integrated TMC receiver. The TMC
antenna is integrated in the car charger cable. Once the car charger
cable is connected, the device can receive current traffic messages. If
required, it can change your route dynamically, e.g. in order to avoid a
traffic jam.
2.4.3
Memory card
A memory card is not required to operate the navigation system
because all the data required for navigation are stored in the internal
memory of the device.
When you connect the navigation system to your computer using a USB
cable, the internal memory is detected as the 'NAVIGON' drive. The slot
for the memory card is detected as the 'NAVIGON SD' drive.
Data backups, software updates and navigation map updates can be
carried out quickly and conveniently with the
NAVIGON Fresh
software,
which you can download free of charge from the website
www.navigon.com/fresh
.