Navien NHB H Series, Инструкция по установке и эксплуатации

Страница: 76 / 143

76 Installing a Cascade System
8.2 Connecting the
Communication Cables
Up to 16 boilers can be connected with Navien
Ready-Link communication cables. Select one of the
boilers in the cascade system as the main boiler, and
then connect the other boilers to it as sub boilers.
Before making any connections, ensure that the
power is turned off to all boilers.
Connect the Ready-Link cables to the CNK1 terminal
strip:
CNB1
CNK1
ZONE3 ZONE2 ZONE1 DHW
CNT1
CNT2
CNT3
CNT4
SUPPLY
RETURN
OUTDOOR
DHW
TANK
CNV3 CNV2 CNV1 CNC3
ZONE3 LWCO ZONE2 ZONE1
CNC4 CNC5 CNC6 CNC1
CNC2
R W C R W C R W C R W C
Note
When installing the cascade system,
refer to “8.1 Connecting Water Supplies”.
Also, connect zone pumps to the zone
controller. Do not connect zone pumps
to the main or sub units.
8.2.1 Configuring the Communication
Settings
After connecting the Ready-Link communication
cables, restore power to the boiler and turn on all
boilers using the Power button ( ).
Refer to “11.13.4 Configuring a Cascade System” to
configure the communication settings.
8.1.1 Piping Sizes and Considerations
When plumbing a cascade system, consider the
following pipe diameters and flow rates. Note that
flow rates above 4 ft/s may cause pipe erosion
or velocity noise. These specifications may vary
depending on installation conditions.
NHB-110H
Qty
Flow Rate (GPM)
@ 20°F ΔT
Recommended
Boiler Pipe Sizes
(2-4 ft/s)
2 32.2 2"
3 48.3 2-1/2"
4 64.4 3"
5 80.5 3"
6 96.6 3-1/2"
7 112.7 3-1/2"
8 128.8 4"
9 144.9 4"
10 161 4"
11 177.1 5"
12 193.2 5”
13 209.3 5"
14 225.4 5"
15 241.5 5"
16 257.6 6"
NHB-150H
Qty
Flow Rate (GPM)
@ 20°F ΔT
Recommended
Boiler Pipe Sizes
(2-4 ft/s)
2 36.6 2"
3 54.9 2-1/2"
4 73.2 3"
5 91.5 3-1/2"
6 109.8 3-1/2"
7 128.1 4"
8 146.4 4"
9 164.7 5"
10 183 5"
11 201.3 5"
12 219.6 5"
13 237.9 5"
14 256.2 6"
15 274.5 6"
16 292.8 6"