Navien Modbus/BACnet Gateway, Руководство по установке и эксплуатации

Страница: 2 / 39

2 2
Quick Start Guide
1. Record the information about the unit. ( Section 3.1 )
2. Set COM settings for the device that will be connected to gateway. (
Section 3.3
)
3. Connect the gateway 3 pin RS-485 R1 port to the RS-485 network connected to each of the devices. ( Section 4.1 )
4. Connect the gateway 3 pin RS-485 R2 port to the field protocol cabling. (
Section 4.2
)
5. Connect power to gateway’s 3 pin connector. ( Section 4.5 )
6. Connect a PC to the gateway via Ethernet cable or by the gateway’s Wi-Fi Access Point. (
Section 5
)
7. Use a web browser to access the gateway Web Configurator page to select the profile of the device attached to the gateway and enter
any necessary device information. Once the device is selected, the gateway automatically builds and loads the appropriate configuration.
(
Section 6
)