Navien Modbus/BACnet Gateway, Руководство по установке и эксплуатации, Страница: 12 / 39

12 CONFIGURE THE GaTEway
6.1 Accessing the Gateway Web
Configurator
1. Navigate to the IP address of the gateway on the local PC
using one of two methods:
●
Open a web browser and enter the IP address of the
Gateway; the default Ethernet address is 192.168.1.24, the
default wi-Fi access Point address is 192.168.50.1
●
If using the FieldServer Toolbox ( Section 5.1.1.2 ), click the
Connect button.
Note
2. Once at the web app splash page, click the Login button.
Figure 13: Web App Splash Page
3. Enter the previously set up or default username and password.
Note
The default username is “admin”. The default
password is “admin”.
Figure 14: Login Window
4. From the web app landing page (Figure 15), click the
Configure tab.
Figure 15: Web App Landing Page
5. Then, click the Profiles Configuration button to go to the web
Configurator page.
Figure 16: Configure Tab
6. CONFIGURE THE GATEWAy