Navaio NGD-8116, Руководство пользователя

Страница: 63 / 74

Remote Surveillance NVR User Manual
58

Router Access
①
Click Start

Settings

Network

TCP/IPv4 to go to the “TCP/IPv4” interface. Set the IP
address, subnet mask, gateway, preferred DNS and alternate DNS of the NVR.
②
Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port
80 might be taken up) and enable UPnP function in both the NVR and the router. If the UPnP
function is not available in the router, you need to forward the LAN IP address, HTTP port and
server port of the NVR to the router. Port mapping settings may be different in different routers,
so please refer to the user manual of the router for details.
③
Get the WAN IP address of the NVR from the router. Open IE browser on a computer,
input the WAN IP address plus HTTP port like http://116.30.18.215:100 in the IE address bar
and then press enter to go to the login interface. Input the username and password of the NVR
in the interface and then click “Login” to go to the live preview interface.
13.2 Remote Control
When you access the NVR through IE for the first time, you need to download and install the
relative components for normal preview and playback. Please refer to the tips in the remote
interfaces for details. The buttons and icons on the top right corner of the remote interface are
introduced as follows.
admin : the current login username.
Logout : click it to log out and return to the login interface.
Modify Password : click it to change the password of the current login user. Input current
password and then set a new password in the popup window. Click “OK” button to save the
new password.
: click it to change the local configuration. Set the snapshot number and click
“Browse” to set the snapshot
path and record file path as shown below. Click “Apply” button to
save the settings.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name
to access the NVR. Click Start

Settings

Network

DDNS to set DDNS (See 10.3 DDNS
Configuration for details). By using DDNS function you can use the domain name plus HTTP port
like http://sunshine.dvrdydns.com:100 to access the NVR via internet.