Navaio NGD-8116, Руководство пользователя

Страница: 30 / 74

Preview NVR User Manual
25
c) Select a camera window in area
②
and then double click the camera or group in area
③
.
The camera or group will be added into the selected window. One camera in the same scheme
cannot repeat. You can click the right-click menu “Clear” in area
②
to remove a single camera
or click to remove all the cameras.
d) Click “Apply” to save the settings.

Start Sequence View
Go to the live preview interface and then click to pop up a little window. Set the dwell
time in the window and then click to start scheme view in sequence. Double click the
sequence view interface to pause the view; double click again to restore the view. Click
to stop the view.
5.3 Image Setting
5.3.1 OSD Configuration
Click Start

Settings

Camera

Image Settings

OSD Configuration to go to the following
interface. Select the camera, input the camera name (you can double click the camera name in
the camera list to change the camera name), enable or disable the name OSD and time OSD
and select the date format and time format. If the name OSD and time OSD are enabled, you
can directly drag the red name OSD and time OSD in the image view area to change the
display position of the two OSDs. Click “Apply” to save the settings.
5.3.2 Image Configuration
Click Start

Settings

Camera

Image Settings

Image Configuration to go to the following
interface. Select the camera and then set the brightness, contrast, saturation and hue of the
camera. You can click “Default” button to restore the image settings to the default factory
settings.