Navaio NGD-8116, Руководство пользователя

Страница: 38 / 74

Record NVR User Manual
33
6.4.2 Schedule Configuration
Click Start

Settings

Record

Record Schedule

Schedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record and timing record.
Click “None” in the drop-down menu to clear the schedule. Click “Apply” to save the settings.
6.5 Manual Recording
Method One : Click on the menu bar at the bottom of the live preview interface to enable
or disable the manual recording of the camera.
Method Two : Go to live preview interface and then click the right-click menu “Manual Record
On” in the camera window or click on the menu bar under the camera window to start
recording.
6.6 Timing Recording
Timing Recording : the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 6.4.2 Schedule Configuration for details.
6.7 Motion Based Recording
Motion Based Recording : the system will start motion based recording when the motion
object appears in the setup schedule. The setup steps are as follows:
①
Set the motion based recording schedule of each camera. See 6.4.2 Schedule
Configuration for details.
②
Enable the motion and set the motion area of each camera. See 9.2 Motion Alarm for
details.
The camera will start motion based recording once you finish the above settings.
6.8 Sensor Based Recording
①
Set the sensor based recording schedule of each camera. See 6.4.2 Schedule Configuration
for details.
②
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the “Record”. See 9.1 Sensor Alarm for details.
Note: Click Start

Settings

Record

Mode Configuration and then set the manual record time in
the interface. Click “Apply” to save the settings.