Navaio NGD-8116, Руководство пользователя

Страница: 17 / 74

Wizard Setup NVR User Manual
12
3 Wizard Setup
You can quickly configure the NVR by wizard setup to make the NVR work normally. You
must configure the wizard if you start the NVR for the first time (you can click “Skip” to
cancel the wizard next time).
Click “Wizard Setup” to start wizard. The setting steps are as follows:
①
System Login . Set the password if you use the wizard for the first time (the default
username of the system is admin ); input username and password next time.
Click “Cryptoguard” button to set password protection for admin as shown below. Set the
question and answer and then click “Add” button. You can click
to delete the question
and answer in the list. Click “OK” to save the settings.
The password of admin can be reset if the cryptoguard has been set. When you input the wrong
password of admin three times in succession, a window will pop up. Click “OK” in the window
to pop up “Retrieve Password” window. Select a question, input the corresponding answer and