Assembly Continued
The following instructions provide direction on the assembly of the Nautilus® K2
™
Vertical Climber. All
instructions in the manual are given with the orientation of standing on a level surface and facing the machine.
Call toll-free 1-800-235-2233 for assembly questions
15
Step 7: Installing the Cupholder
Tools:
* Adjustable wrench
* 7/32 Allen wrench
Parts & Hardware:
* Completed assembly from step 5
* Cup holder (p/n 57-0480)
* 3/8” x ¾ Button Head Screw (2 x 01-4036)
7-1 Using the two 3/8” fasteners, attach the
Cupholder to the handrail assembly. (Figure 14)
7-2 Finish the Cupholder installation by tightening
fasteners with the 7/32” Allen and adjustable
wrenches.
Step 8: Connecting the Power Supply
Parts:
* Power Supply (57-0350)
8-1 Connect the DC Power Cable from the Power
Supply to the power connector located on the bottom
cover.
8-2 Place the power supply on the floor near an AC
wall outlet.
8-3 Check that the Input AC Power Rating marked
on the Power Supply matches the available power.
8-4 Attach the Country-Specific power cord to the
power supply and plug into the wall outlet.
!
To reduce the risk of electric shock, fire and to
prevent severe damage to the machine, use only the
power supply approved for use with this equipment.
Figure 14