Para obtener este manual en Español Latino Americano vaya a:
http://support.nautilus.com.
Table of Contents
Before Assembly
2
Features
23
Important Safety Instructions — Assembly
3
Operations
24
Specifications
4
Remote Heart Rate Monitor
31
Tools
4
Maintenance
34
Parts
5
Level the Machine
35
Hardware
6
Moving the Machine
35
Assembly
7
Troubleshooting
36
Important Safety Instructions — Operation
20
Contacts
39
Safety Warning Labels and Serial Number
21
Guide de Montage et du Propriétaire 41
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of minimum 74” x 130” (190 cm x 330 cm).
Follow these basic points when you assemble your machine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left
(counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through
the holes.
5. The assembly requires 2 people.
Note:
Some axles contain oil. Use caution to avoid staining clothes or carpet.
Patent Information
This product may be covered by US and Foreign Patents and Patents Pending.
222
© 2009 Nautilus, Inc., All rights reserved
™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include
NAUTILUS®, BOWFLEX®, STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos.
Other trademarks are the property of their respective owners.
Содержание E514
