Nautel NX5 AM, Руководство по эксплуатации и техническому обслуживанию

Страница: 188 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.168 VERSION 0.1 2015-08-01
Remote I/O Settings - Using the Front Panel UI
To view the
Remote I/O
screen (see Figure 3.2.153 ) on the front panel display, select
Remote I/O
from
the
Main Menu
.
Figure 3.2.153: Remote I/O screen
Use the up and down buttons to select
Remote Inputs
(see Remote Inputs - Front Panel UI, on page
3.2.168 ),
Remote Outputs
(see Remote Outputs - Front Panel UI, on page 3.2.170 ) or
Analog Outputs
(see Monitoring Analog Outputs, on page 3.2.171 ) to view or edit detail on the selected inputs or
outputs.
Remote Inputs - Front Panel UI
Using the
Remote Inputs
screens (see Figure 3.2.154 on page 3.2.169 ), you can configure up to 10
digital inputs that allow you to remotely control various operational characteristics of the transmitter.
Unless otherwise noted, these inputs are only accepted by the transmitter if remote control is enabled.
That setting can only be made by a local user using the front panel UI.
Nautel sets digital input defaults prior to shipping. See the NX5 Pre-installation Manual for details.