Nautel NV20LT Скачать руководство пользователя страница 70

NV20LT/NV15LT INSTALLATION MANUAL

PRE-INSTALLATION / INSTALLATION ASSISTANCE

PAGE 2.11.6

VERSION 4.0  2018-02-26

Technical Assistance

Nautel's field service department provides telephone technical assistance on a 24 hour, seven days a 
week basis. Requests by other media (fax or e-mail) will be responded to the next working day if 
received after Nautel's normal working hours. Contact the appropriate field service centre:

Nautel Limited
10089 Peggy’s Cove Road
Hackett’s Cove, NS Canada B3Z 3J4
Phone: +1.902.823.3900 or
Toll Free: +1.877.6NAUTEL (6628835) (Canada & USA only)
Fax: +1.902.823.3183

Nautel Inc. 
201 Target Industrial Circle 
Bangor, Maine USA 04401 
Phone: +1.207.947.8200 
Fax: +1.207.947.3693 

Customer Service (24 hour support) 
+1.877.628.8353 (Canada & USA only)

+1.902.823.5100 (International) 

Email: 

[email protected]

Web: 

www.nautel.com

Module Exchange Service

In order to provide Nautel customers with a fast and efficient service in the event of a problem, Nautel 
operates a factory rebuilt, module exchange service which takes full advantage of the high degree of 
module redundancy in Nautel equipment. This module exchange service is operated from Nautel's 
factory in Bangor, Maine and Hackett's Cove, Nova Scotia. These two locations allow us to provide a 
quick turn around service to keep our customers on the air. During the transmitter's warranty period, up 
to thirteen months from shipment, repair and exchange of modules is at no charge to the customer. 
When the warranty has expired, a charge of 80% of the list price for all exchanged modules is made. If 
the faulty module is returned to Nautel within 30 days, a credit is issued reducing this charge by one 
half to 40% of the list price. USA customers are required to contact our Bangor, Maine facility. Canadian 
and overseas customers should contact our Nova Scotia, Canada facility.

Содержание NV20LT















































































Отзывы: