manualshive.com logo in svg

Nautel NV20LT, Руководство по установке

Поделиться
Скачать
Nautel NV20LT Скачать руководство пользователя страница 65

NV20LT/NV15LT INSTALLATION MANUAL

PRE-INSTALLATION / INSTALLATION ASSISTANCE

VERSION 4.0  2018-02-26

PAGE 2.11.1

SECTION 2.11: PRE-INSTALLATION / INSTALLATION 
ASSISTANCE

Nautel provides a number of support options to help you during pre-installation planning and 
preparation: 

Pre-Installation Consulting

Installation and Commissioning Service

Online Documentation - see page 2.11.2

On-Site Support - see page 2.11.3

Training - see page 2.11.3

Standard Warranty - see page 2.11.4

Extended Warranties - see page 2.11.7

Pre-Installation Consulting 

Nautel field support specialists are available to answer questions and work with you to ensure that your 
site will be ready for the installation of your NV20LT/NV15LT transmitter. For support, contact Nautel 
Customer Service and request assistance (

“On-Site Support” on page 2.11.3

).

Installation and Commissioning Service

Nautel offers an installation and commissioning service to customers who want assistance with 
configuring and commissioning a new Nautel transmitter. After the customer completes the transmitter 
assembly and installation, Nautel technical personnel will spend up to three days on-site to help make 
the ac power, RF and remote connections, and to assist with the configuration and testing of Nautel 
equipment.

The customer is responsible for ensuring that the following stages of installation have been completed, 
prior to the arrival of Nautel personnel:

Ac power wiring for the transmitter has been installed and connected at the transmitter and at the 
breaker panel or the building’s service entrance. 

Содержание NV20LT















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды