natus XLTEK Protektor32 Скачать руководство пользователя

Страница: 75 / 81

XLTEK Protektor32

Instructions for Use

Remote Monitoring

Before You Begin

Before you can begin using XLTEK Portals software (i.e. LocalPortal and RemotePortal), consult your

hospital or institution's IT department to configure the appropriate IP addresses, subnet masks and

default gateways.
To verify that all your computers are connected and that you will be able to run XLTEK Portals software

successfully, it is advisable to run Microsoft Netmeeting first.
To open

Microsoft Netmeeting

, go to:

Start > Programs > Accessories > Communications

To adjust your Audio and Video parameters, select:

1) Adjusting Audio Parameters for Remote Monitoring

2) Adjusting Video Parameters for Remote Monitoring

Once you have run NetMeeting successfully and adjusted your Audio and Video parameters, you are

ready to start using XLTEK LocalPortals (on the Acquisition System) and RemotePortals software (on the

Remote System) and begin Remote Monitoring.

XLTEK Portals

LocalPortal

LocalPortal is the XLTEK Remote Monitoring software that is run on the Local or

Acquisition Station

(i.e.

the computer that is acquiring the patient data). This software enables data to be sent to one or more

Remote Monitoring Stations

(i.e. to computers that are observing the Acquisition Station).

To open the LocalPortal software, go to

Start > Programs > XLTEK

and select

Local Portal.

It is important that you properly configure your LocalPortal software to optimize the performance of your

Remote Monitoring capability.

RemotePortal

RemotePortal is XLTEK's Remote Monitoring software that is run on the

Remote Station

(i.e. the

computer that remotely observes the Acquisition Station). The RemotePortal software enables the

Remote Station to receive live waveforms (EP, free run EMG, triggered EMG, EEG) as well as historical

waveforms. The software also supports the transmission of text messages.
To open the RemotePortal software, go to

Start > Programs > XLTEK

and select

Remote Portal

Options,

under

Nickname,

specify the name that the Acquisition Station will see.

When right-clicking the name of an Acquisition Station in your list, an information box with details about

the case currently being acquired will appear over the Remote Portal window. To remove the information

box from the screen, click on it with your mouse.

Содержание XLTEK Protektor32


















































































Результаты поиска

Содержание XLTEK Protektor32

Отзывы:

Похожие инструкции для XLTEK Protektor32

Бренды по названию

Популярные бренды

natus XLTEK Protektor32, Инструкция по эксплуатации

Результаты поиска

Содержание XLTEK Protektor32

Отзывы:

Похожие инструкции для XLTEK Protektor32

Бренды по названию

Популярные бренды