natus MADSEN Alpha OAE+ Скачать руководство пользователя | Manualshive

Страница: 37 / 59

background image

MADSEN Alpha OAE+ Screener User Manual

37

7

Printing

Depending on your configuration, you can print complete results from Alpha OAE+ using a docking station connected to a PC with a printer,
or using a label printer connected to the docking station.

7.1

Printing from Alpha OAE+

Warning: Before you make any printouts, make sure that the patient is not in contact with Alpha OAE+ by removing the probe from the

patient's ear.

To comply with the safety requirements for a medical device system, connection to the printer must always be done outside the patient area
(min. 1.5 meters/5 feet from the patient).

Note: Testing is not possible when Alpha OAE+ is placed in the docking station or connected to the printer.

Note: Do not switch off Alpha OAE+ while printing is in progress. Doing so may result in distorted test data.

Note: If the label printer is not connected or if it is switched off, an error message appears on the screen.

Note: Use only the label printer recommended. Alpha OAE+ automatically recognizes the label printer.

Note: Do not print from Alpha OAE+ when the label printer status light indicates "Cooling down" or "Buffer overflow."

Note: The Alpha OAE+ docking station should not be connected simultaneously to both a PC and the label printer.

Note: Re-adjust the labels / papers to remove possible paper feed jams.

Label printer printing

Note: Make sure the Alpha OAE+ docking station is not connected to a PC.

1.

Connect the label printer cable to the docking station and place the Alpha OAE+ in the docking station.

2.

Switch on the printer.

Note: Before attaching the Alpha OAE+ docking station to a PC, disconnect the label printer from the docking station.

PC printing

Connect the USB cable to the PC and to the docking station. Place Alpha OAE+ in the docking station.

Disconnect the docking station from the label printer by removing the label printer cable.

«
...
35
36
37
38
39
...
»

Содержание MADSEN Alpha OAE+




























































Отзывы:

Нет отзывов

Похожие инструкции для MADSEN Alpha OAE+

Бренд: made for movement Страницы: 51

Бренд: Eaton Страницы: 16

Бренд: Eaton Страницы: 6

Бренд: Ecco Страницы: 17

Бренд: Ultrawave Страницы: 30

Бренд: Ultrasound Technologies Страницы: 12

Бренд: Yuwell Страницы: 2

Бренд: IKEA Страницы: 24

Бренд: Marani Страницы: 35

Chandler Engineering 1910

Бренд: Ametek Страницы: 46

Бренд: ORORO Страницы: 16

Бренд: DALBO Страницы: 27

Infinity Wash XL

Бренд: Coemar Страницы: 6

Бренд: Cleaver Scientific Страницы: 41

Бренд: WESTEK Страницы: 4

Бренд: Tadano Страницы: 15

KEW FORK 2300 R

Бренд: KYORITSU Страницы: 9

Бренд: Thinkrider Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды