◦
If Retrigger is disabled (default setting)
,
the next loop range you choose will start at
the current position in the previously selected Scene: e.g., leaving the current Scene
on beat 3 will cause the new Scene to start playing on its beat 3. This ensures that
the global groove of your track is not interrupted!
Hardware
To adjust the Scene Sync setting:
1.
Press and hold
GRID
to enter Grid mode (or pin it by pressing
GRID
+ Button 1).
2.
Press Button 2 to select
SYNC
.
On the right display you see the available Scene Sync values. The current value is high-
lighted and the corresponding pad is lit. The default value
SCENE
(pad
15
) means that
the next time you select a new Scene or loop range, the switch will happen once the cur-
rent Scene has played to the end.
3.
Press a pad to select the desired value, for example pad
3
(for
1/4
, a quarter note).
→
The next time you select a new Scene or loop range, the switch will happen on the next
quarter note.
To adjust the Retrigger setting:
1.
Press and hold
SCENE
to enter Scene mode (or pin it by pressing
SCENE
+ Button 1).
At the bottom left corner of the left display you see the current Retrigger value (
OFF
by
default).
2.
Turn Knob 1 to select the desired value, for example
ON
.
→
The next time you select a new Scene or loop range, it will start from the beginning.
Creating a Song using Scenes
Playing with Scenes
MASCHINE MIKRO MK2 - Manual - 275
