Page 8
7700 RULES FOR SAFE OPERATION
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. Before use, be sure everyone
operating this equipment reads and understands this manual as well as any labels packaged with or
attached to the machine and components and view the instruction video. Extra copies of the manual and
video are available.
1. KNOW YOUR EQUIPMENT:
Read this manual and view instruction video carefully to learn
equipment applications and limitations as well as potential hazards associated with this type of
equipment.
2. DISARM MACHINE:
Remove cutting head or drop cutting head to the floor when machine is not
in use.
3. DO NOT “SIDE HILL” MACHINE:
See Page 29.
4. DISCONNECT CHARGER’S:
Disconnect machine from charger’s before operating machine.
5. AVOID DANGEROUS ENVIRONMENTS:
Do not use in rain, damp or wet locations, or in the
presence of explosive atmospheres (gaseous fumes, dust or flammable materials). Remove materials
or debris that may be ignited by sparks.
6. KEEP WORK AREA CLEAN AND WELL LIT:
Cluttered, dark work areas invite accidents.
7. DRESS PROPERLY:
Do not wear loose clothing. These may be caught in moving parts. Keep hands
and gloves away from moving parts.
8. USE SAFETY EQUIPMENT:
Everyone in the work area should wear safety goggles or glasses
complying with current safety standards. Wear hearing protection during extended use and a dust
mask for dusty operations. Hard hats, face shields, safety shoes, etc. should be worn when specified
or necessary.
9. KEEP BYSTANDERS AWAY:
Children and bystanders should be kept at a safe distance from the
work area to avoid distracting the operator. Operator should be aware of who is around them and
their proximity.
10. PROTECT OTHERS IN THE WORK AREA:
Provide barriers or shields as needed to protect others
from debris and machine operation.
11. USE PROPER ACCESSORIES:
Using accessories that are not recommended may be hazardous.
Be sure accessories are properly installed and maintained. Do not delete a guard or other safety
device when installing an accessory, attachment or servicing.
12. CHECK FOR DAMAGED PARTS:
Inspect guards and other parts before use. Check for
misalignment, binding of moving parts, improper mounting, broken parts and any other conditions that
may affect operation. If abnormal noise or vibration occurs, turn the tool off immediately and have the
problem corrected before further use. Do not use damaged equipment. Tag damaged machine “DO
NOT USE” until repaired. A guard or other damaged parts should be properly repaired or replaced.
For all repairs, insist on only identical National replacement parts.
13. REMOVE ALL ADJUSTING KEYS AND WRENCHES:
Make a habit of checking that the adjusting
keys, wrenches, etc. are removed from the tool before turning it on.
WARNING:
Disarm machine when not in use. Remove Cutting Head or lower Cutting Head to the
floor. When exiting machine (getting off machine), remove lower Cutting Head to the floor. When
transporting machine around job site, remove Cutting Head. Failure to follow these instructions could
cause severe bodily injury.
Содержание All Day Battery Ride-On 7700
