![background image](http://html1.mh-extra.com/html/national/all-day-battery-ride-on-7700/all-day-battery-ride-on-7700_instruction-manual_3373489080.webp)
Page 80
7700 MATERIAL SAFETY DATA
Liquids’, National Fire Protection Association (NFPA 77, `Recommended Practice on Static Electricity`, and/or the
American Petroleum Institute (API) Recommended Practice 2003, `Protection Against Ignitions Arising Out of
Static, Lightning, and Stray Currents`.
Container Warnings
: Container is not designed to contain pressure. Do not use pressure to empty container or it
may rupture with explosive force. Empty containers retain product residue (solid, liquid, and/or vapor) and can be
dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame,
sparks, static electricity, or other sources of ignition. They may explode and cause injury or death. Empty
containers should be completely drained, properly closed, and promptly returned to a drum reconditioner or
disposed of properly.
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
GENERAL CONSIDERATIONS:
Consider the potential hazards of this material (see Section 3), applicable exposure limits, job activities, and other
substances in the work place when designing engineering controls and selecting personal protective equipment.
If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material,
the personal protective equipment listed below is recommended. The user should read and understand all
instructions and limitations supplied with the equipment since protection is usually provided for a limited time or
under certain circumstances.
ENGINEERING CONTROLS:
Use in a well-ventilated area.
PERSONAL PROTECTIVE EQUIPMENT
Eye/Face Protection
: No special eye protection is normally required. Where splashing is possible, wear safety
glasses with side shields as a good safety practice.
Skin Protection: No special protective clothing is normally required. Where splashing is possible, select
protective clothing depending on operations conducted, physical requirements and other substances in the
workplace. Suggested materials for protective gloves include: 4H (PE/EVAL), Nitrile Rubber, Silver Shield, Viton.
Respiratory Protection
: No respiratory protection is normally required.
If user operations generate an oil mist, determine if airborne concentrations are below the occupational exposure
limit for mineral oil mist. If not, wear an approved respirator that provides adequate protection from measured
concentrations of this material. For air-purifying respirators use a particulate cartridge.
Use a positive pressure air-supplying respirator in circumstances where air-purifying respirators may not provide
adequate protection.-
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Attention: The data below are typical values and do not constitute a specification.
Color:
Yellow
Physical State
: Liquid
Odor
: Petroleum odor
pH
: Not applicable
Vapor Pressure
: <0.01 mmHg @ 37.8 C (100 F)
Vapor Densit
y (Air = 1): >1
Boiling Point
: >315.6 C (600 F)
Solubility: Soluble in hydrocarbons; insoluble in water
Freezing Point
: Not Applicable
Melting Point
: Not Applicable
Specific Gravity
: 0.86 - 0.87 @ 15.6 C (60.1 F) / 15.6 (60.1F)
Density
: 0.86 kg/I - 0.9 kg/l @ 15 C (59 F)
Viscosity
: 22 cSt - 61.2 cSt @40 C (104 F) (Min)
SECTION 10 STABILITY AND REACTIVITY
Chemical Stability:
This material is considered stable under normal ambient and anticipated storage and
handling conditions of temperature and pressure.
Incompatibility With Other Materials
: May react with strong acids or strong oxidizing agents, such as chlorates,
nitrates, peroxides, etc.
Hazardous Decomposition Products
: None known. (None expected)
Содержание All Day Battery Ride-On 7700
