![background image](http://html1.mh-extra.com/html/national/all-day-battery-ride-on-7700/all-day-battery-ride-on-7700_instruction-manual_3373489009.webp)
Page 9
7700 RULES FOR SAFE OPERATION
14. GUARD AGAINST ELECTRIC SHOCK:
Prevent body contact with grounded surfaces such as pipes,
battery plug connection, radiators, ranges and refrigerators. When scoring or making cuts, always
check the work area for hidden wires or pipes to reduce shock hazards.
15. AVOID ACCIDENTAL STARTING:
Be sure equipment is turned off before plugging it in. Do not use
if the power switch does not turn the machine on and off properly.
16. DO NOT FORCE EQUIPMENT:
Equipment will perform best at the rate for which it was designed.
Excessive force only causes operator fatigue, increased wear and reduced control.
17. KEEP HANDS AND FEET AWAY FROM ALL CUTTING EDGES AND MOVING PARTS.
18. WEAR GLOVES WHEN CHANGING BLADES.
19. DO NOT ABUSE CORD:
Never unplug the battery charger by yanking the cord from the outlet or
from the battery. Pull plug rather than cord to reduce the risk of damage. Keep the cord away from
heat, oil, sharp objects, cutting edges and moving parts.
20. DO NOT OVERREACH. MAINTAIN CONTROL:
Stay properly seated. Keep proper footing and
balance at all times. Maintain a firm grip.
21. STAY ALERT:
Watch what you are doing, and use common sense. Do not use when you are tired,
distracted or under the influence of drugs, alcohol or any medication causing decreased control.
22. STARTING MACHINE:
On/off switch must be in off position before connecting to power source.
23. UNPLUG EQUIPMENT:
Disconnect battery and/or charger’s before servicing or when not operating.
24. MAINTAIN EQUIPMENT CAREFULLY:
Keep control levers dry, clean and free from oil and grease.
Keep cutting edges sharp and clean. Follow instructions for lubricating and changing accessories.
Periodically inspect battery, charger’s and all plug connections. Have damaged parts repaired or
replaced.
25. STORE IDLE EQUIPMENT:
When not in use, store in a dry, secured place. Keep away
from children. Remove blade or keep blade lowered to the floor (disarm machine).
26. MAINTAIN LABELS AND NAME PLATES:
These carry important information. If unreadable or
missing, contact National for a free replacement.
27. MACHINE IS HEAVY, DO NOT DROP:
Counter weights are heavy. Take caution when removing
or reassembling. Take caution when moving or transporting. Do not drop batteries.
28. BATTERIES:
Only replace batteries by the manufacturer or its servicing agent. Do not open or
tamper with Batteries. Doing so voids all warranties and could cause injury due to electric shock.
29. COMMERCIAL APPLICATION:
Machine is intended for commercial use only.
WARNING:
Exposure to dust may cause respiratory ailments. Use approved NIOSH or OSHA
respirators, safety glasses or face shields, gloves and protective clothing. Provide adequate ventilation
to eliminate dust, or to maintain dust level below the Threshold Limit Value for nuisance dust as
classified by OSHA.
Содержание All Day Battery Ride-On 7700
