![background image](http://html1.mh-extra.com/html/national/all-day-battery-ride-on-7700/all-day-battery-ride-on-7700_instruction-manual_3373489012.webp)
Page 12
7700 BATTERY OPERATION
CAUTION:
Electric shock hazard.
CAUTION:
Use caution when connecting or disconnecting to avoid electrical shock.
BATTERY OPERATION
Machine is equipped with two (2) 200 amp hours, 48 volt battery
packs put in parallel to create 400 amp hours.
Batteries do not take a memory allowing recharge at any state.
Do not over discharge. Over discharging could cause damage to
batteries - 42 Volts
REMOVING BATTERIES
• Switch 70 amp breaker to “off” position
• Remove back lid
• Disconnect yellow strobe light
• Disconnect blue plugs
• Remove top battery
• Disconnect lead to hour meter
• Remove seat plate
• Disconnect back-up alarm
• Disconnect both battery chargers
• Disconnect all wiring
• Remove batteries
REPLACING BATTERIES
• Reverse procedure from above. Replace all twelve batteries at the same time.
• Store in a safe dry place
**See Battery Material Safety Data Information on pages 78-85
WARNING:
Hood has pinch points. Do not get hands or fingers pinched when closing hood.
WARNING:
Service work on batteries should only be done by a trained professional. High
amperage exists and can cause serious injury or death.
WARNING:
Service work on batteries should only be done by a trained professional. High
amperage exists and can cause serious injury or death.
WARNING:
Remove all jewelry before servicing batteries.
CAUTION:
Keep batteries dry.
Содержание All Day Battery Ride-On 7700
