Chapter 3
Local Command Set
©
National Instruments Corporation
3-89
UMapTrigTrig
Purpose
Unmap a specified TTL, ECL, Star X, Star Y, external connection (GPIO), or miscellaneous
signal line that was mapped to another line using the
MapTrigTrig
function.
Query Syntax
UMapTrigTrig <srcTrig>, <destTrig>
where
<srcTrig>
is the source line to unmap from a destination, and the value of
<destTrig>
corresponds to the destination line mapped from the source.
Value
Trigger Line
0 to 7
TTL trigger lines 0 to 7
8 to 9
ECL trigger lines 0 to 1
40 to 49
External source/destination (GPIO 0 to 9)
40
Front panel In (connector 1)
41
Front panel Out (connector 2)
42
Front panel In (unbuffered)
43
Connection to EXTCLK input pin
44 to 49
Hardware-dependent GPIOs 4 to 9
50
TIC counter pulse output (TCNTR)
51
TIC counter finished output (GCNTR)
60
TIC TICK1 tick timer output
61
TIC TICK2 tick timer output
