Chapter 3
Local Command Set
©
National Instruments Corporation
3-73
The value of
<mode>
specifies the signal conditioning mode (where 0 = no conditioning).
The conditioning effects for bits 0 to 3 are as follows.
Response
Program response: 0
Console response:
Mapping complete (line = <line text source> mapped to line = <line
text destination>, mode = <mode>).
<CRLF>
where the meaning of
<line text source>
and
<line text destination>
correspond
to the value of
<srcTrig>
and
<destTrig>
as follows.
Example
Map TTL line 4 to go out of the front panel with no signal conditioning.
MapTrigTrig 4, 41, 0
Bit
Conditioning Effect
0
Synchronize with next CLK edge
1
Invert signal polarity
2
Pulse stretch to one CLK minimum
3
Use EXTCLK (not CLK10) for conditioning
Value of
<srcTrig>
or
<destTrig>
Value of
<line text source>
or
<line text destination>
0 to 7
TTL <line>
8 to 9
ECL (<line> - 8)
40 to 49
GPIO (<line> - 40)
50
TCNTR
51
GCNTR
60
TICK1
61
TICK2