National Flooring Equipment 5700-aus, Инструкция по эксплуатации

Страница: 6 / 58

GENERAL RULES FOR SAFE OPERATION
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. Before use, ensure operators reads and understand this manual. Read and
understand labeling on machine and components. All operators must view the instruction video. Extra copies of the manual and video are avail-
able by contacting National Flooring Equipment.
1. KNOW YOUR EQUIPMENT: Read this manual carefully to learn equipment applications and limitations, potential hazards associated with
this type of equipment. Keep this manual with the equipment it is associated with.
2. DISARM MACHINE: Remove cutting head or drop cutting head to the fl oor when machine is not in use.
3. DO NOT “SIDE HILL” MACHINE.
4. DISCONNECT
CHARGER: Disconnect machine from charger before operating machine.
5. AVOID DANGEROUS ENVIRONMENTS: Do not use in rain, damp or wet locations, or in the presence of explosive atmospheres (gas-
eous fumes, dust or fl ammable materials). Remove materials or debris that may be ignited by sparks.
6. KEEP WORK AREA CLEAN AND WELL LIT: Cluttered, dark work areas invite accidents.
7. DRESS PROPERLY: Do not wear loose clothing. These may be caught in moving parts. When working wear gloves and insulated non-skid
footwear. Keep hands and gloves away from moving parts.
8. USE SAFETY EQUIPMENT: Proper eye protection should be worn at all times. Wear hearing protection during extended use and a dust
mask for dusty operations. Hard hats, face shields, safety shoes, etc. should be worn when speci fi ed or necessary.
9. KEEP BYSTANDERS AWAY: Children and other bystanders should be kept at a safe distance from the work area to avoid distracting the
operator and contacting the equipment or extension cord. Operator should be aware of the proximity of bystanders. This machine is not
intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
10. PROTECT OTHERS IN THE WORK AREA: Provide barriers or shields as needed to protect others from debris.
11. USE PROPER ACCESSORIES: Using accessories that are not recommended may be hazardous. Be sure accessories are properly
installed and maintained. Do not delete a guard or other safety device when installing an accessory or attachment.
12. CHECK FOR DAMAGED PARTS: Inspect guards and other parts before use. Check for misalignment, binding of moving parts, improper
mounting, broken parts and other conditions that may affect operation. If abnormal noise or vibration occurs, turn off immediately and have
the problem corrected before further use. Do not use damaged equipment. Tag damaged equipment “DO NOT USE” until repaired. Miss-
ing or damaged parts should be properly repaired or replaced immediately. For all repairs, use only identical National replacement parts.
13. REMOVE ALL ADJUSTING KEYS AND WRENCHES: Make a habit of checking that the adjusting keys, wrenches, etc. are removed from
the tool before turning it on.
14. GUARD AGAINST ELECTRIC SHOCK: Prevent body contact with grounded objects such as pipes, radiators, ranges and any other
related surfaces. When making cuts, always check the work area for hidden wires or pipes. Hold your equipment by insulated nonmetal
grasping surfaces. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.
15. AVOID ACCIDENTAL STARTING: Be sure equipment is turned off before plugging in. Do not use equipment if the power switch does not
turn the equipment on and off.
16. DO NOT FORCE EQUIPMENT: Equipment will perform best at the rate for which it was designed. Excessive force only causes operator
fatigue, increased wear and reduced control.
17. KEEP HANDS AWAY FROM ALL CUTTING EDGES AND MOVING PARTS.
18. WEAR gloves when changing accessories.
19. DO NOT ABUSE CORD: Never unplug by pulling the cord from the outlet. Pull plug rather than cord to reduce the risk of damage. Keep
the cord away from heat, oil, sharp objects, cutting edges and moving parts.
20. DO NOT OVERREACH. MAINTAIN CONTROL: Keep proper footing and balance at all times. Maintain a fi rm grip.
21. STAY ALERT: Watch what you are doing and use common sense. Do not use when you are tired, distracted or under the in fl uence of
drugs, alcohol or any medication causing decreased control.
22. CHARGING MACHINE: On/Off switch must be in off position before connecting to power source.
23. UNPLUG EQUIPMENT: When not in use and before changing accessories or performing recommended maintenance, unplug machine.
24. MAINTAIN EQUIPMENT CAREFULLY: Keep handles dry, clean and free from oil and grease. Keep cutting edges sharp and clean. Follow
instructions for lubricating and changing accessories. Inspect equipment cords and extension cords for damage. Replace damaged parts.
Use only identical National replacement parts.
Safety
www.nationalequipment.com Phone: 763-315-5300 6 www.nationalequipment.com Phone: 763-315-5300 6 www.nationalequipment.com Phone: 763-315-5300 6