background image

Fax: 763-535-8255

[email protected]

56

Chevron   HD 22 - 68 - hydraulic fl uid (continued)

56

REGULATORY INFORMATION
EPCRA 311/312 CATAGORIES: 

1. Immediate (Acute) Health Effects: NO 

2. Delayed (Chronic) Health Effects: NO

3. Fire Hazard: NO  

 

 

4. Sudden Release of Pressure Hazard: NO

5. Reactivity Hazzard: NO

REGULATORY LISTS SEARCHED:

01-1=IARC Group1  

03=EPCRA 313

01-2A=IARC Group 2A 

04=CA Proposition 65

01-2B=IARC Group 2 

05=MA RTK

02=NTP Carcinogen 

06=NJ RTK

No components of this material were found on the regulatory lists above.

CHEMICAL INVENTORIES:

All components comply with the following chemical inventory requirments: AICS (Australia), DSL (Canada), ENCS (Japan), IECSC (China), 

KECI (Korea), PICCS (Philippines), TSCA (United States)
One or more components is listed on ELINCS (European Union). Secondary noti

fi

 cation by the importer may be required.

NEW JERSEY RTK CLASSIFICATION:

Under the New Jersey Right-to-Know Act L. 1983 Chapter 315 N.J.S.A. 34:5A-1 et. seq., the product is to be identi

fi

 ed as follows: PETROLEUM 

OIL (Hydraulic oil)

WHMIS CLASSIFICATION:

This product is not considered a controlled product according to the criteria of the Canadian Controlled Products Regulations.

OTHER INFORMATION
NFPA RATINGS:

 Health: 0 Flammability: 1 Reactivity: 0

HMIS RATINGS: 

Health: 1 Flammability: 1 Reactivity: 0

(0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme, PPE:- Personal Protection Equipment Index recommendation,*-Chronic Effect Indicatior). 

These values are obtained using the guidelines or published evaluations prepared by the National Fire Protection Association (NFPA) or the 

National Paint and Coating Association (for HMIS ratings).

LABEL RECOMMENDATION:

 Label Category: INDUSTRIAL OIL 1 - IND1

REVISION STATEMENT: 

This revision updates the following sections of this Material Safety Data Sheet:  

Revision Date:

 January 15, 2007

ABBREVIATIONS THAT MAY HAVE BEEN USED IN THIS DOCUMENT: 

TLV - Threshhold Limit Value  

 

 

 

TWA - Time weighted Average

STEL - Short-term Exposure Llimit 

 

 

 

PEL - Permissible Exposure Limit

CAS - Chemical Abstract Service Number 

 

 

IMD?IMDG - International Maritime Dangerous Goods Code

API - American Petroleum Institute 

 

 

 

MSDS - Material Safety Data Sheet

ACGIH - American Confrence of Government Industrial Hygienists  CVX - Chevron
NFPA - National Fire Protection Association (USA) 

 

DOT - Department of Transportation

NFPA - NationalToxicology Program(USA) 

 

 

IARC - International Agency for Research on Cancer

OSHA - Occupational Safety and Health Administration
Prepared according to the OSHA Hazard Communication Standard (29 CFR 1910.1200) and the ANSI MSDS Stanard (Z400.1) by the Chevron 

Energy Technology Company, 100 Chevron Way, Richmond, California 94802.

The above information is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this 

information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made available 

subsequent to the date hereof may suggest modifi cations of the information, we do not assume any responsibility for the results of 

its use. This information is furnished upon condition that the person receivbing it shall make his own determintion of the suitability of 

the material for his particular purpose.

Содержание 5700-aus



























































Отзывы: