National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 8 of 8
10-110008-000 01/19
Diagram E
INSTALLATION
Fully Tighten All Hardware
1. Tighten the Lower Mount Point.
(13mm Socket, with Rachet
2. Tighten the Upper Mount Point.
(6mm Hex Wrench and 13mm Box Wrench)
3. Tighten the Center Mount Point.
(3mm Hex Wrench and 8mm Box Wrench)
4. If not using a footrest, plug hole with Plug
(15).
Repeat Installation On Right Side
When installing the right side Comfort Bar
there is no need to remove the horn.
Enjoy your New Comfort Bars
OPTIONAL FOOTPEG EXTENDERS
- Foot Peg Mount Brackets are available in
two lengths and finishes to match the
Comfort Bars.
Diagram E
- Attach your favorite footrests with our ad-
justable mounts that allow upward, rearward
or downward positioning.
Figure 16
-
Fasteners to install the Footpeg Mount Kits
are included in the Bags.
- Or install your favorite accessory (lights,
horns, etc.) at any location on the bars
- Comfort Bars are constructed from 1.00"
(25mm) tubing in your choice of – steel with
e-coat and black powdercoat finish; or
stainless steel with electropolished finish.
