Figure 5
Figure 6
5. Remove the horn. Remove stock screw to
temporarily remove the horn.
(12mm Box
Wrench or Socket. Figure 5
6. Remove the stock Screw holding the stock
engine bar to the frame. This screw will not be
re-used.
(12mm Socket, with Rachet and Long
Extension or no Extension if removing from
front horn area.) Figure 6
To easily locate this bolt follow the engine bar
tube to the frame.
Remove or Alter the Black Cover
To install the P Clamp (10), you have a choice
to remove the Black Cover permanently from
the motorcycle as shown in figure 7, or alter the
cover and re-install it as shown in figure 8
Figure 7 and 8
If you choose to leave it off, proceed to Page 6.
Figure 8, Black Cover Altered
Figure 7, Black Cover Removed
National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 4 of 8
10-110008-000 01/19
