National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 5 of 8
10-110008-000 01/19
Figure 9
Diagram B
To alter the Black Cover follow this easy
procedure or visit www.nationalcycle.com for an
installation video.
Altering Black Cover
1. Position the Covers as shown in
Diagram B
.
Once the Covers are altered they are no longer
symmetrical. The cut will start .25”, (6mm)
inside at the FRONT.
Cut is .875” (23mm) wide.
2. Use a pencil to mark the cut lines as shown in
Diagram B. (Pencil or Marker) Diagram B
3. Use a Dremel with a 7/8” cutting tool or a
Hack Saw with about 10 teeth per inch and a
Blade to trim.
(Dremel with Cutting Tool or
Saw and Blade) Figure 9
Helpful Hints: Hold the cover securely, by hand
or in a vise. Wear safety glasses and protective
gloves.
4. Repeat process on Right Cover.
5. Re-install the Black Cover onto the Valve
Cover using the pins removed in Figure 3.
Figure 10
Figure 10
