ITEM
ELECTROPOLISH
P4014-003
BLACK
P4015-002
DESCRIPTION
QTY.
TOOLS / NOTES
1
90-970114-000
90-970116-000
Bar, Left Side
1
2
90-970115-000
90-970117-000
Bar, Right Side
1
BAG#1308
BAG#1309
3
50-505342-000
50-505342-000
Screw, SS M8 x 4 0
2 13mm Socket and Ratchet
4
49-491503-000
49-491503-000
Washer, Split
2
5
37-374369-000
37-374398-000
Backing Plate
2
6
51-515753-000
51-515753-000
Screw, SS, Front M8 x 50 2 6mm Hex Wrench
7
51-515748-000
51-515748-000
Screw, SS, Rear M8 x 45 2 6mm Hex Wrench
8
80-816008-000
80-816008-000
Sleeve
1
9
42-423030-000
42-423030-000
Nut, M8-1.25
4 13mm Box Wrench
10
37-400550-000
37-400550-000
P Clamp, SS
2
11
51-516215-000
51-516215-000
Screw, M5 x 16
2 3mm Hex Wrench
12
49-490317-000
49-490317-000
Washer, M8 SS
6
13
49-490511-000
49-490511-000
Washer, SS M6
2
14
42-423049-000
42-423049-000
Nut, M5
2 8mm Box Wrench
15
44-448864-000
44-448864-000
Plug
2 Decorative Plug
2
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
screen for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
Please check the contents of this Kit with the Parts List and the Parts Diagram A on Page 3. Report any discrepancies to National Cycle, Inc. Please include
the date on the outside of the package, and your place of purchase. Thank you.
Note:
Tips for facilitation of operation, control and ad-
justment, as well as maintenance work.
Attention:
Special notes and cautionary measures which can
prevent damage to the accessory or motorcycle.
COMFORT BARS for HONDA GL1800 2018 ~
P4014-003 Stainless Steel with Electropolish Finish
P4015-002 Steel with Ecoat and Black Powder Finish
Installation Video Available- nationalcycle.com
CONTENTS OF KIT
Parts Diagram A, Page 3
National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 1 of 8
10-110008-000 01/19
Additional Tools
For Use In
5mm Hex Wrench
Removal of Covers
12mm Socket, Ratchet and Long Extension
Removal of Stock Lower Bolt
Tape
Protect Covers from Scratches
Needle Nose Pliers
Hold “P” Clamp During Installation
Tools to alter Black Cover (Optional)
Dremel® Tool with .75” Cutting Wheel, Sharp Small Knife or Blade, Pencil and Ruler
