National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / [email protected]
©2019 National Cycle, Inc.
Page 2 of 8
10-110008-000 01/19
PREPARATION
1. Position motorcycle securely on its center
stand or lift.
Working on LEFT side of motorcycle.
2.
Remove Covers
Two front screws holding Axillary Light
Cover (a).
(5mm Hex Wrench) Figure 1
Two screws, front and rear, holding
Decorative Valve Cover (b).
(5mm Hex
Wrench) Figure 2
3. Remove pins from inside of Valve Cover.
Figure 3
4. Remove Black Cover (c).
Figure 4
Figure 1
Figure 3
Figure 4
Figure 2
a
b
c
