Installation Guide for NCPE Split-System Condensing Units
14
IMPORTANT!!!
BEFORE REMOVING A WARRANTY COMPRESSOR,
PLEASE FILL OUT THE FOLLOWING
AND CALL (800) 523-7138.
REMOVAL OF COMPRESSOR WITHOUT FACTORY VERIFICATION
CAN LEAD TO WARRANTY CREDIT BEING DENIED
1.
Incoming Voltage to Compressor at Contactor is:__________Volts
2.
Compressor Starting AMP Draw:__________
3.
Compressor Winding OHM Reading between Terminals C & S:__________
4.
Compressor Winding OHM Reading between Terminals C & R:__________
5.
Compressor Winding OHM Reading between Terminals R & S:__________
6.
Compressor Winding OHM Reading between Terminals C & Ground:__________
7.
Compressor Winding OHM Reading between Terminals R & Ground:__________
8.
Compressor Winding OHM Reading between Terminals S & Ground:__________
9.
Run Capacitor Reading from HERM to COM:__________
10.
Start Capacitor Reading if Used:__________
11.
If the Compressor is Operating Please Indicate the Following:
Suction Pressure:__________psig Discharge Pressure___________psig
Super Heat:_____________F Subcooling:______________F
AC
Ω
Ω
Ω
Ω
Ω
Ω
R
HERM
FAN
TOP VIEW OF CAPACITOR
C
uF
+
uF
+
