Set Up
Injectable Arm
Intramuscular Injections
Intramuscular injections may be performed in
inserts at the left hip, right thigh, at both deltoids of
the standard arms, and left deltoid of the injectable
training arm . Inject AIR ONLY as the inserts cannot
be drained in the standard arms, injection training
arm, and thigh .
To remove the inserts on standard arms and thigh:
1 . Remove the eight screws retaining the shoulder
or hip joints to the arm or leg .
2 . Roll skin down to expose inserts prior to
removing and replacing them (See Figures 78,
thigh & 79, Shoulder) .
3 . Compress them sideways and pull out .
4 . Reverse procedure to replace .
Note: Avoid using alcohol or similar substances
to prep the injection site . Use distilled water to
simulate this procedure .
Intramuscular Injections Precautions
1 . This synthetic blood is specially formulated to be
compatible with the self-sealing veins and plastics
used in manufacturing the injectable training arm .
2 . NEVER use synthetic blood for intramuscular
injection .
3 . DO NOT use dull or burred needles, these will
cause leaks in the system . Burred needles will
cause permanent damage .
4 . DO NOT allow synthetic blood to dry on the
simulator — it may stain the skin .
5 . Use only 500 cc of infusion fluid . Larger amounts
will increase the pressure of the venous system,
resulting in leaks .
6 . DO NOT clean the simulator with solvents or
corrosive materials, as they will damage it .
7 . DO NOT use for subcutaneous injection .
Intradermal Injection Simulator (LF01008U) is
specifically designed for intradermal injection
training and practice .
Fig 78.
Fig 76.
Fig 75.
Fig 79.
Fig 77.
Moulage
DANi comes with self-
adhesive moulage that
simulates self-harm
wounds . Also, included
are foot wounds in
various stages of severity
(See Figure 75-77) .
29
Содержание DANi LF04500
Страница 39: ...YEARS 5 Up to 5 years warranty...
