Set Up
Care and Maintenance
Overall Care and Maintenance
General Care
1 . Most cleaning can be done with a soft cloth, mild
soap, and warm water . Avoid over washing the
painted areas on the manikin .
2 . Stubborn stains can be treated by using Nasco
Cleaner and a soft cloth .
3 . Stains caused by make-up, ink, and newsprint
are indelible and cannot be removed . Avoid
contact with these substances and do not apply
cosmetics or Betadine
®
solution to the manikin .
4 . Follow cleaning, care, storage, and maintenance
guidelines in each section of this manual .
5 . Remove all batteries prior to storing your
equipment for future use .
Cautions
Solvents or corrosive materials will damage the
simulator . Never place the simulator on any
kind of printed paper or plastic . These materials
will transfer indelible stains . Ball-point pens will
also make indelible stains . Do not store in direct
sunlight .
Storage
In order to prepare DANi for storage perform a
normal manikin breakdown procedure by removing
all of its limbs and packaging them neatly it its case
(preferably in the same packaging offered when
first purchased) . In addition, be certain to follow
these instructions:
• Storage temperature should not exceed 122°F
(50°C) or fall below 41°F (5°C) on a (non-
condensing) relative humidity free environment .
• If a soft-sided case is being used, the manikin
should lie flat .
• The manikin should NEVER be stored or shipped
with fluids in the system .
38
Содержание DANi LF04500
Страница 39: ...YEARS 5 Up to 5 years warranty...