NARGESA C3006, Инструкция

Страница: 25 / 71

C3006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 24
What can be seen now on the LCD display, is obviously, the screen to accede the menu to operate with
blocks. However, if instead of pressing the Return key, you press any other Navigation key, you’ll see that
you can move into the menu in order to edit the blocks shwown below:
Picture 43. Access screen to accede the menu and edit blocks.
And a third menu which comes to be useful for allowing you to make the adjustmen of the guillotine blades,
as we are going to be able to notice later on.
Through this simple way, you can accede and go into both blocks menus the machine offers.
So, we advise you to pay attention to the following comments, in order to familiarize with the menus, aiming
at having a better understanding on how useful the machine can be.
Finally, bear in mind that in case you wish to go back to the memory of the top you were before acceding
the blocks menus, just press the ESC key and you will achieve it.
5.10.1. Menu to edit blocks
This menu is useful for editing the different blocks the Guillotine C3006 has, that is to say, it allows you to
create cells and introduce the different positions of the top to make a whole sequence of sucessive cuts, as
well as defining the perfomance mode of these, Manual or Automatic.
5.10.2. Selection of the block
Taking as a reference the information shown in picture 43 if you press the Return key you will be able to
accede the menu to edit blocks The screen below will show up when you accede the menu:
Picture 44. Detail of the starting screen of the menu to edit blocks
In this screen you can make the selection of the block you desire to edit among the 50 ones available, by
pressing the arrow keys on the keyboard:
The selected block will appear on screen at each pressing made on these keys. In order to find quicker the
desired block, just keep the key pressed for more than 1.5 Sec. As you do so, every 0,25 ses it will go to
the next block or the block before.
Once the block to be edited has been selected, it is required topress the Return key. When you do that the
information according to this block will appear on screen.
EDIT
BLOCKS
EDIT
BLOCKS 00