NAPCO Gemini GEM-P816, Инструкция по программированию

Страница: 41 / 56

NAPCO Security Systems
R
GEM-P816 Programming Instructions
Page 41
Compatibility Number (Not Applicable)
THIS FEATURE IS NOT COMPATIBLE WITH THE GEM-P816 CONTROL
PANEL. DO NOT CHANGE THIS SETTING.
Press the
R
button to continue or press the
C
button to exit.
EZM Address
The keypad's internal EZM (Expansion Zone Module) may be utilized to
provide four additional wired zones.
Whether used alone or in conjunction
with optional GEM-EZM series modules or other keypad EZMs, it must be
assigned a unique address (or Group number, see Keypad Programming
Workbook) similar to its keypad address.
If no other EZMs are to be used,
designate the keypad as Group “01” at the “
EZM ADDRESS 00
” display. In multiple-EZM systems, enter an assigned
group number “01” through “14”. (Each EZM must have a unique assigned group number, starting with “01” and pro-
ceeding consecutively.) Press the
R
button to continue or press the
C
button to exit.
Zone Response
The normal loop response of each keypad expansion zone is 750mS, how-
ever the response time of any zone can be reduced to 50mS as follows.
1. Of the following, circle the number(s) in parentheses associated with the
zone(s) to be changed:
Zone 1=(1); Zone 2=(2); Zone 3=(4); Zone 4=(8)
2. Add up the circled numbers.
3. At the keypad, enter the sum as a two-digit number “01” through “15” on the display, then press
U
.
Example. Change Zones 2, 3 and 4 to 50mS response.
1. Circle numbers for Zones 2, 3 and 4: (2), (4) and (8).
2. Add up the circled numbers: 2 + 4 + 8 = 14.
3. Enter “14” at the keypad, then press the
U
button.
Press the
R
button to continue or press the
C
button to exit.
Program Control Message (Not Applicable)
THIS FEATURE IS NOT COMPATIBLE WITH THE GEM-P816 CONTROL
PANEL.
Press the
R
button to continue (the display will loop back through selec-
tions, for changes) or press the
C
button to exit the Keypad Configura-
tion Mode (display will read “
01 OUT OF SYSTEM
”). Then replace Jumper JP1 across Pins 1–2 (top two).
New
Compat # 0000
EZM Address
01
Zone Response
00
Program Control
Message # ?