NAPCO Gemini GEM-P816, Инструкция по программированию

Страница: 30 / 56

GEM-P816 Programming Instructions
Page 30
NAPCO Security Systems
R
NOTES:
(A) 50ms Loop Response only available for zones 1-8. For all other Zones, loop response is determined by
jumpers on the GEM-EZM8 and/or keypad configuration on the GEM-RP1CAe2 or GEM-K1CA.
(B) 2-wire Smoke Detectors only available for zones 7 & 8, and Fire must also be selected.
(C) If Fire Alarm Verification is selected, then Fire must also be selected.
DEFAULTS: The zone options indicated are automatically set after exiting the Easy Menu Driven Mode.
•
Priority, Selective Bypass, Alarm Output, Auto Reset, Swinger Shutdown and Zone Area 1 are enabled for the
total number of zones entered in “
# OF ZONES IN AREA1 ENTER # ZONES
”.
•
Alarm Telco 1 is enabled for the zone number(s) entered in “
REPORT ALL ZONES TO CENTRAL ZONES? Y/N
”.
•
Entry/Exit 1 and Chime are enabled for the zone number(s) entered in “
ENTRY/EXIT ZONES ENTER ZONE #
”.
•
Exit/Entry Follower and Interior Bypass are enabled for the zone number(s) entered in “
INTERIOR ZONES ENTER ZONE
#
”.
•
Pulse Alarm Output is enabled for the zone number(s) entered in “
FIRE ZONES ENTER ZONE #
” or “
2-WIRE FIRE ZNS ENTER
ZONE #
”.
•
Fire is enabled for the zone number(s) entered in “
FIRE ZONES ENTER ZONE #
”.
•
2-Wire Smoke Detector is enabled for the zone number(s) entered in “
2-WIRE FIRE ZNS ENTER ZONE #
”.