N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 45 / 72

© by N&W GLOBAL VENDING S.p.A.
41
05-2008 3235-00
- to disassemble the water funnel, turn the green ring nut
counterclockwise;
pay special attention on reassembling it: it shall be
completely closed;
- to disassemble the impellers, use a finger to lock the
-
disk mounted on the whipper motor shaft (see fig. 10).
then turn the impeller to unscrew it.
Wash all the components by using detergents.
-
make sure that all visible residuals and films are
mechanically removed. If necessary, use a brush;
sanitize by making use of sanitizing agents.
dip the components into a container with the sanitizing
-
solution you have prepared before for about 20 min ;
reassemble the collection boxes and the water funnels;
-
reassemble the powder deposit drawers and the pow-
-
der funnels after having carefully dried them.
after having mounted the parts, it is anyway nec-
-
essary to act as follows:
pour some drops of the sanitizing solution into the
-
mixer;
rinse the parts in question abundantly to remove any
-
residual of the solution you have used. Use the mixer
washing function when the door is closed.
dISaSSEmbLINg aNd cLEaNINg tHE
mILKEr
the device intended to dispense hot milk ( milker ) shall
be carefully cleaned and sanitized at the time of the
installation of the machine and at least once a week or
more frequently, according to the use of the machine and
the type of milk in use in order to guarantee the compli-
ance of dispensed products with sanitary rules.
the parts to be cleaned are listed here below:
milker intended to dispense milk, to be disassembled in
-
all its parts ;
dividing nozzle and telescopic nozzle cover;
-
milk suction tube composed by several pieces to en-
-
able the user to clean by means of pigs.
to disassemble the parts, act as follows:
unscrew the knurls at the bottom of the telescopic
-
nozzles
press the hook at the back of the section at the bottom
-
of the nozzle cover and extract it downwards
-
Fig. 30
Fig. 31
Milker 1-
Dividing nozzles ( milk) 2-
Milker components 3-
Nozzle telescopic cover 4-
Pig 5-
Nozzle support 6-
Milk suction tube 7-
Flow rate regulator 8-
Dividing nozzle cover 9-
Dividing nozzle body 10-
Milk container 11-
Tube disconnection rubber-holder 12-