N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 17 / 72

© by N&W GLOBAL VENDING S.p.A.
13
05-2008 3235-00
chapter 2
INStaLLatIoN
Installation and any subsequent maintenance opera-
tion must be carried out when the machine is live and,
therefore, by the personnel skilled and trained on the
use of the machine as well as aware of the specific risks
such a condition may involve.
the machine is not suitable for outdoor installation. It
must be installed in dry rooms at a temperature between
35.6°F ed i 89.6°F..
the machine can not be installed in a room where water
jets are used for cleaning.
the machine can be arranged near a wall, but in such
a way that the back is at least 2 inches from the wall for
regular ventilation. never cover it with cloths or alike.
the machine shall be placed on a levelled surface, at
least mm. 32 inches
at the time of the installation, it is necessary to
completely sanitize the water circuits and the parts
in contact with foodstuffs in order to remove any
bacteria build-up.
maINS SWItcHES
door
Whenever you open the door, a special switch will power
off the electric installation of the equipment to allow the
user to carry out the ordinary filling and cleaning opera -
tions described here below in totally safe conditions.
the line cable terminal board, the fuses, the inter-
ference suppressor and the power relays remain
anyway live.
top panel
Whenever you open the top panel of the machine, a
switch will provide for disconnection and enable the user
to fill the machine on safe conditions.
dispensing compartment
If you remove the dispensing compartment back, a
double switch will signal to the control electronics of the
machine that the compartment is lacking and it will also
power off the power circuits. The heating elements will
remain on.
the power on key shall not be left inside the ma-
chine. It shall be kept by the personnel qualified
and trained on the use of the machine.
When the door is open, you are not allowed to
access any live part. only the parts protected by
covers and marked by the plate “power off before
removing the cover” will remain live inside the
machine.
before removing these covers, it is necessary to
detach the power supply cable from the mains.
You can close the door completely and power on the dis-
penser only after having removed the key from the door
switch, closed the top panel of the machine and placed
the back of the dispensing compartment.
Fig. 13
Dispensing compartment switch 1-
Door switch 2-
Transformer fuses 3-
Mains fuses 4-
Top panel switch 5-