N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 35 / 72

© by N&W GLOBAL VENDING S.p.A.
31
05-2008 3235-00
ProgrammINg ParamEtErS
c
asH
this group of functions is intended to manage all the
parameters relative to the payment systems and sales
prices.
tecH>
set paraMeters
tecH>
casH
�
�
s
ElEcTioN pricEs
For every single selection it is possible to set 5 different
prices, the operation of which will vary according to the 4
time bands, if enabled.
Prices can be programmed (from 0 to 65,535) globally
(the same price for all selections) or on a selection basis.
since most products shall be sold at the same price, it
is advisable to program the price globally and to change
the price of the selections having a different sales price.
T
imE baNDs
Four time bands can be programmed for the sale of
products at different prices.
Time bands can be programmed by hour (from 00 to 23)
and by minute (from 00 to 59) at the start and at the end.
If the start-of-band and end-of-band values are equal to
00.00, the band is disabled.
the time of reference is represented by an internal clock
that can be programmed by:
day/month/year week-day 1-7
and then by
hour/minutes/seconds.
c
oiN mEcHaNisms
It is possible to decide which protocol you wish to enable
for the payment system and which functions you wish to
manage.
the following payment systems are available:
- MDB
If you choose one of the systems, you can manage its
functions.
E
xEcuTiVE
the following payment systems are arranged for the
executive system:
- standard
- price Holding
- coges
- U-Key
- sida
V
aliDaTors
Whenever the display shows the “Validat. lines” function
(line programming) of the “programming” menu, you can
change the value of the 6 validator coin lines from a to F.
bdV
The BDV protocol menus will enable the user to define
the following functions.
type of sale
change refused
Maximum credit
Maximum change
coins accepted
coins not accepted
Dispensing buttons
“exact amount value”
c.p.c. peripheral unit
Minimum tube level
mdb
The MDB protocol menus will enable the user to define
the following functions.
type of sale
change refused
Maximum credit
Maximum change
coins accepted
coins returned
Banknotes accepted
Minimum tube level
coins accepted with “exact amount”