N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 23 / 72

© by N&W GLOBAL VENDING S.p.A.
19
05-2008 3235-00
description
operation
FUNctIoN bUttoNS
the function buttons are arranged on the external key-
board. They enable the user to perform specific functions
or to preselect different product doses.
the buttons may change their position or be unavailable
according to the models, the arrangement of the keys
and the products in use (l ay out ).
at the time of the installation refer to the selection dose
table to insert the plates correctly.
the keys are listed here below:
�
Mixer washing: if you hold it down for over two
seconds, you will be required to enter a pass
word.
�
stop: press it to stop the selection in progress.
�
small: if you press it before pressing a selec
tion button, you can dispense a smaller product
dose.
�
large: if you press it before pressing a selec
tion button, you can dispense a larger product
dose.
INStaNt dISPENSINg cYcLES
according to the type of dispensed product, the dis-
pensing cycles of the various selections are studied to
achieve the best result in terms of performance and drink
quality.
powder is dispensed intermittently for chocolate-based
selections. It is dispensed before water for instant coffee-
based selections.
powder is always dispensed intermittently for the selec-
tions with a dose for jugs. this means that the water-
powder proportion is preserved even if you press the
�
key to stop the dispensing cycle.
mIxEr WaSHINg cYcLES
You can enable a washing cycle to clean the mixers by
pressing the button on the internal side of the door and,
if enabled, the button on the external pushbutton panel
( for qualified personnel only ).
to prevent the user from acting on the washing button
�
unintentionally, it is necessary to hold it down for
about two seconds and, then, to enter a 5-number pro-
grammable password.
Washing consists in operating all whipper motors and
solenoid valves.
If a milker is available, the “milk removal” cycle is pro-
posed, just as it is described by the “power on” para-
graph.
the
�
and
�
buttons may be unavailable or change
their position, according to the models/versions ( lay-
outs ).
Fig. 20
Telescopic dispensing nozzles 1-
Menu of available selections 2-
Steam knod (supplied) 3-
Steam nozzle 4-
Liquid waste tray 5-