N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 32 / 72

© by N&W GLOBAL VENDING S.p.A.
28
05-2008 3235-00
m
aNagEmENT of cHaNgE TubEs
access the function “Manage tubes” to load or empty the
change tubes manually.
If you confirm loading, “Credit : ——” will appear on the
display. this is the value of the money made available
in the tubes for the change. If you insert a coin into the
validator, the display will increase the value of the money
made available in the tubes for the change.
If you confirm unloading, you can establish the tube on
which you wish to act. Whenever you press the enter key
�
, a coin is ejected by the active tube.
Unload tubes
tube a ÷ X
Unload tubes
credit:#####
load tubes
credit:#####
FIll>
Manage tubes
�
�
� �
� �
T
EmpEraTurE Display
Use this function to read the boiler temperature directly
expressed in °c.
FIll>
Boiler temperature
Boiler temperature
c = ##,# c2=##,#
�
�
T
EsT DispENsiNg
every single button (or combination of keys according to
the models) will operate the relative selection for com -
plete or partial test dispensing (water, powder, water,
only and without accessories) (see the selection dose
table).
FIll>
Water only
FIll>
test
FIll>
complete selection
FIll>
powder only
�
�
� �
� �
Please Note: For espresso coffee based selections,
only additions are dispensed with partial powder
and water deliveries. If no addition is provided for
by the selection, the display will show “disabled
Sel.”
gsm p
rEalarms
the control software can send an “ending product”
signal via GSM modem when a well-defined (program -
mable) number of pieces or grams of powder of a given
product is lacking. Use this function to reset the counters
intended to manage prealarms.
FIll>
GsM
FIll>
reset pre-alarm counters
�
�
EVaDTs
TraNsfEr
If you activate this function, the machine will be waiting
for connection with a device for the purpose of acquiring
eVaDts statistic.
FIll>
eVaDts
FIll>
connection
�
�
f
illEr mENu maskiNg
the functions described by this chapter can be selec-
tively disabled by the “technician menu”.