N&W Global Vending Kobalto, Установка, эксплуатация и обслуживание

Страница: 47 / 72

© by N&W GLOBAL VENDING S.p.A.
43
05-2008 3235-00
c
lEaNiNg iNsTaNT proDucT coNTaiNErs
- Remove the containers from the machine;
- disassemble the product outlet ports and extract the
Augers from the rear side of the container;
- clean all the pieces with a solution of hot water and
sanitising products and dry them carefully.
c
lEaNiNg THE sTEam sucTioN cHaNNEl
to access the steam suction channel, remove the right
side of the machine by removing the fastening screws.
remove the fastening knurl and extract the suction
channel by releasing it from the flexible pipe.
after having washed and dried it carefully, reassemble it
in the reverse order.
Fig. 32
Container cover 1-
Container lock 2-
Shutter operating knob 3-
Container 4-
Hopper lock gasket 5-
Shutter gear 6-
Container shutter 7-
Container entrance protection 8-
Protection fastening screws 9-
Seal for grinder 10-
Fig. 34
Suction channel 1-
Fastening knurl 2-
Flexible pipe 3-
Side panel fastening screws 4-
Fig. 33
Beater for wheel 1-
Wheel 2-
Wheel pin 3-
Auger 4-
Pin fastening clip 5-
Powder outlet port 6-
Auger fastening ring nut 7-