NAL Research Corporation (TN2012-02-V1.0)
39
Test Command:
+CSMS=?
Test command returns the supported message services of the A3LA-RS. Response is in the
form:
+CSMS: (list of supported <service>s)
A.8.55 +CSTA – Select Type of Address
Set Command:
+CSTA=[<type>]
Select the type of number for the dial command D. <type> is the type of address in integer
format specified in GSM 4.08 subclause 10.5.4.7. Typical values for <type> are:
129
Unknown type (default)
145
International number
Read Command:
+CSTA?
Query the current address type settings. The response is in the form:
+CSTA: <type>
Test Command:
+CSTA=?
List the supported address type settings. The response is in the form:
+CSTA: (supported <type>s)
A.8.56 +GMI – Manufacturer Identification
Exec Command:
+GMI
Query the A3LA-RS RF board manufacturer. This command is similar to +CGMI.
A.8.57 +GMM – Model Identification
Exec Command:
+GMM
Query the A3LA-RS RF board model. This command is similar to +CGMM.
A.8.58 +GMR – Revision
Exec Command:
+GMR
Query the A3LA-RS RF board revision. This command is similar to +CGMR.
A.8.59 +GSN – Serial Number
Exec Command:
+GSN
Query the A3LA-RS IMEI. This command is similar to +CGSN.
A.8.60 +GCAP – General Capabilities
Exec Command:
+GCAP
Query the A3LA-RS’ overall capabilities.
A.8.61 A – Answer
Answer immediately. This causes the A3LA-RS to answer the incoming data (or voice for A3LA-
R/RM/RGS) call.
A.8.62 D – Dial
Dial a data (or voice for A3LA-R/RM/RGS) call number. The dial command causes the A3LA-RS
to enter originate mode and act as an auto dialer for connection to other modems or voice lines.
The usual format is ATDnx..x where n is a Dial Modifier and x is a number. The following are
