NAL A3LA-RS Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 101

NAL A3LA-RS Скачать руководство пользователя страница 35

NAL Research Corporation (TN2012-02-V1.0)

35

+CPBS: <storage>,<used>,<total>

where <used> indicates the number of used locations and <total> shows the total capacity of
<storage>.

Test Command:

+CPBS=?

Test command returns supported storages.

A.8.47 +CPBW – Write Phonebook Entry

Exec Command:

+CPBW=[<index>][,<number>[,<type>[<text>]]]

Execution  command  writes  phonebook  entry  in  location  number  <index>  in  the  current
phonebook  memory  storage  selected  with  +CPBS.  Entry  fields  written  are  phone  number
<number>  (of  address  type  <type>)  and  text  <text>  associated  with  the  number.  If  those
fields are omitted, phonebook entry is deleted. If <index> is left out, but <number> is given,

entry is written to the first free location in the phonebook. Both <text> and <number> should

be of string type enclosed by ““; for example, “John”,”1234”.

Test Command:

+CPBW=?

Test command returns the location range supported by the current storage, the maximum
length of <number> field, supported number formats of the storage, and the maximum length
of <text> field. Response is in form:

+CPBW: (list of supported <index>s),<nlength>,(list of supported <type>s),<tlength>

A.8.48 +CPIN – Enter PIN

Set Command:

+CPIN=<pin>[,<newpin>]

Set command sends to the A3LA-RS a password which is necessary before it can be operated

(SIM Card PIN Code, SIM PUK, etc.). If no password request is pending, no action is taken by
the A3LA-RS.



If the password required is SIM PUK, then <newpin> is required, where <newpin> is
the new SIM Card PIN to replace the old SIM Card PIN.



If the password required is SIM PUK2, then <newpin> is required, where <newpin> is

the new SIM Card PIN2 to replace the old SIM Card PIN2



Both <pin> and <newpin> should be of string type enclosed by “ “; for example,
”1234”.

Read Command:

+CPIN?

Read command returns an alphanumeric string indicating whether some password is required or

not. Response is in the form:

+CPIN: <code>

where <code> can be one of the following:

READY

A3LA-RS is not waiting for any password.

PH PIN

A3LA-RS is waiting for Phone Unlock Code to be given.

SIM PIN

A3LA-RS is waiting for SIM Card PIN1 Code to be given.

SIM PUK

A3LA-RS is waiting for SIM PUK to be given (because SIM PIN1 is blocked).

SIM PIN2

A3LA-RS is waiting for SIM PIN2 to be given.*

«
...
33
34
35
36
37
...
»

Содержание A3LA-RS






































































































Отзывы:

Нет отзывов