NAL A3LA-RS Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 101

NAL A3LA-RS Скачать руководство пользователя страница 60

NAL Research Corporation (TN2012-02-V1.0)

60



The length of the text message entered in this way is limited only by the maximum

mobile originated message length of 1960 bytes



The mobile originated buffer will be empty upon power-up



If any data is currently in the mobile originated buffer, it will be overwritten

Command Response:

For the “AT+SBDWT” form:

0

SBD message successfully stored in mobile originated buffer

1

SBD message write timeout. No terminating carriage return was sent within the
transfer period of 60 seconds.

For the “AT+SBDWT=<text message>” form:

OK

SBD message successfully stored in mobile originated buffer

ERROR An error occurred storing SBD message in mobile originated buffer

A.8.104 +SBDDET – Short Burst Data: Detach

Exec Command:

+SBDDET

Initiates an SBD session to detach the A3LA-RS from the Gateway.

Command Response:

+SBDDET:<status>,<error>

where:
<status>:

0

Detach successfully performed

1

An error occurred while attempting the detach

<error>:

Gateway-reported values:

0

Detach successfully performed

1..4

Reserved, but indicate success if used

5..14 Reserved, but indicate failure if used
15

Access is denied

A3LA-RS-reported values:

16

Modem has been locked and may not make SBD calls (see +CULK command)

17

Gateway not responding (local session timeout)

18

Connection lost (RF drop)

19

Link failure (A protocol error caused termination of the call)

20..31 Reserved, but indicate failure if used
32

No network service, unable to initiate call

33..34 Reserved, but indicate failure if used
35

A3LA-RS is busy, unable to initiate call

36..

Reserved, but indicate failure if used

This instructs the GSS to disable (detach) SBD ring alerts for the calling A3LA-RS. Successful
completion of the detach command implies that the GSS has performed the requested detach
action and the A3LA-RS is no longer registered for SBD ring alerts. This session does not
transfer any MO or MT messages.

«
...
58
59
60
61
62
...
»

Содержание A3LA-RS






































































































Отзывы:

Нет отзывов