NAL A3LA-RS Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 101

NAL A3LA-RS Скачать руководство пользователя страница 37

NAL Research Corporation (TN2012-02-V1.0)

37

A.8.50 +CREG – Network Registration

Set Command:

+CREG=[<n>]

Set command controls the presentation of an unsolicited result code +CREG: <stat> when
<n>=1 and there is a change in the A3LA-RS network registration status, or code +CREG:

<stat>[,<lac>,<ci>] when <n>=2 and there is a change in the registration status of the A3LA-
RS.

Valid values for <n> are:

0

disable network registration unsolicited result code (default)

1

enable network registration unsolicited result code +CREG: <stat>

2

enable  network  registration  and  location  information  unsolicited  result  code
+CREG:  <stat>[,<lac>,<ci>].  <lac>  indicates  the  location  area  code  in  string
format; <ci> is in the  cell identifier which is not applicable to IRIDIUM.

<stat> can be one of the following:

0

not registered, A3LA-RS is not currently searching a new operator to register to

1

registered, home network

2

not registered, but A3LA-RS is currently searching a new operator to register to

3

registration denied

4

unknown

5

registered, roaming

Read Command:

+CREG?

Read command returns the status of result code presentation and an integer <stat> which
shows the network registration status of the A3LA-RS. Location information elements <lac> and

<ci> are returned only when <n>=2 and A3LA-RS is registered in the network. Response is in
the form:

+CREG: <n>,<stat>[,<lac>,<ci>]

Test Command:

+CREG=?

Test command lists the supported settings for +CREG. Response is in the form:

+CREG: (list of supported <n>s)

A.8.51 +CSCA – SMS Service Center Address

Set Command:

+CSCA=<sca>[,<tosca>]

Set command updates the SMSC address, through which mobile originated SMs are
transmitted. In PDU mode, setting is used by the send and write commands, but only when the

length of the SMSC address coded into <pdu> parameter equals zero.

<sca>: GSM 04.11 [8] RP SC address Address-Value field in string format (i.e., enclosed by
quotes ““);

<tosca>: GSM 04.11 [8] RP SC address Type-of-Address octet in integer format;

Read Command:

+CSCA?

Read command returns the current service center address. Response is in the form:

+CSCA: <sca>,<tosca>

«
...
35
36
37
38
39
...
»

Содержание A3LA-RS






































































































Отзывы:

Нет отзывов